sql

Universal Oven UN55

Rp. 18,500,000
Last Updated
21 Sep 2021
Minimum Order
1 1
Category
Laboratorium

Specification of Universal Oven UN55

Control of standard components

ControlCOCKPIT multifunctional digital adaptive PID-controller microprocessor with high-definition TFT-colour display

Temperature sensor Pt100 1 DIN class A in 4-wire-circuit

Digital timer backwards counter with target time setting, adjustable from 1 minute to 99 days

Temperature

Set temperature range in ° C min. 5 ° C above ambient up to + 300 ° C

resolution of display for setpoint values 0.1 ° C up to 99.9 ° C, 0.5 ° C frOM 100 ° C and for actual values

0.1 ° C (LED)

Control technology

Adjustable parameters temperature (Celsius or Fahrenheit), air flap position, programme time, time zones,

Summertime/wintertime

Function SetpointWAIT the process time does not start until the set temperature is reached

Language setting of the German/English/Spanish/French

Calibration three freely selectable temperature values

And

natural convection

Freshadmixture of water adjustment of pre-heated fresh air admixture by air flap control in 10% steps

Vent vent connection with restrictor flap

Communication

AtmoCONTROL programming software for reading out, managing and organising the data logger via Ethernet

interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software

available USA accessory (on demand).

Documentation programme stored in case of power failure

Safety

/> Temperature control adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class

1 according to DIN 12880 to switch off the heating approx. 20 ° C above the nominal temperature

Autodiagnostic system for fault analysis

Page 2/3

Memmert GmbH + Co. KG | Tel. + 49 (0) 9122/925-0 | Fax + 49 (0) 9122/145 85 | E-mail info@memmert.com

Universal Oven Memmert UN55-en

Standard equipment

Door fully insulated stainless steel with2-point door locking (compression door lock)

Internals 1 stainless steel grid

Scope of delivery incl. works calibration certificate for + 160 ° C

Housing rear zinc-plated steel

The Interior of the easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing with integrated and

protected large-area heating on four sides

Stainless steel interior

(A) w x h x d (B) (C): 400 x 400 x 330 mm

Volume 53 l

Max. loading of the chamber: 80 kg

Textured stainless steel casing

(D) w x h x d (E) (F): 784 x 585 x 514 mm

Electrical data

Voltage

Electrical load

115 V, 50/60 Hz

approx. 1700 W

Voltage

Electrical load

230 V, 50/60 Hz

approx. 2000 W

Packing/shipping data

the appliances must be transported upright

Customs in number 8419 8998

Country of origin of the Federal Republic of Germany

WEEE-Reg.-



 


Lihat Selengkapnya

Untuk keterangan lebih lanjut, silahkan download PDF ini :

Ulasan

/5
Ulasan
5
4
3
2
1

Foto dari Pembeli

Ulasan dari Pembeli

Filter
Semua
Dengan Foto
5
4
3
2
1
Request a Quote
Produk Siap di Pesan
Rp 0
1
Logo IDT
Chatbot